OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2732

Pressure Control Solenoid F Performance/Stuck Off

P2732 says that the clutch behind valve F does not take up torque although the solenoid works electrically, so the gearbox slips wherever that clutch is needed. On GM nine-speed units valve F serves clutch C6; the TCM counts a failure when C6 slip stays at 200 rpm or more for 3 s, and three such events give a Type A fault after one trip (tables 18OBDG04 and 20OBDG03A). GM bulletins name the code solenoid valve 6 stuck off. On the 10L80 in 2024 Silverado and Sierra 1500, PIP6002 and 24-NA-181 replace the valve body, and 25-NA-014 and 25-NA-080 trace the loss of reverse and of gears above third to a wrongly stamped spacer plate together with a worn check ball. On the 10L1000 with the 6.6 gas engine, 24-NA-148 pairs P2732 with P2714 and a worn C4 piston seal.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 32

Possible causes

  • Mis-stamped spacer plate or worn check ball in the valve body (GM 10L80) high
  • Worn clutch piston seal losing apply pressure (GM 10L1000) medium
  • Solenoid F or regulator valve sticking closed medium
  • Low fluid level or aerated fluid low

Symptoms

  • No reverse
  • Transmission will not shift beyond third gear
  • Slip or flare and MIL on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2732

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication