OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2729

Pressure Control Solenoid E Control Circuit Low

P2729 indicates the control line of solenoid E is pulled low, usually by a short to ground. On the Allison 1000 GM detects this when the output connection has almost no impedance to ground and confirms it within 75 ms (Type A). The eight-speed and six-speed tables of 2016 flag the low state for 0.3 s and set it after one trip. For the 2023 Corvette dual-clutch transmission, a sense voltage below roughly 1.7 V with the driver on, held for 150 ms, identifies a ground short at the system pressure pilot valve (Type A); Ford's TR9070 stores its shorted switch case under this number. GM bulletin PIP5646B for 2019-2020 Silverado and Sierra 8L90 shows that P2729 can also come from a failing TCM rather than the harness.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 29

Possible causes

  • Control wire shorted to ground high
  • Shorted winding in solenoid E medium
  • TCM internal failure (GM 8L90) medium
  • Conductive contamination in the connector low

Symptoms

  • MIL on and fail-safe mode
  • Abrupt stop or wheel lock at low speed in the GM 8L90 case
  • Limited gear selection

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2729

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication