OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2727

Pressure Control Solenoid E Control Circuit/Open

P2727 is set when the control circuit of solenoid E is open, so no current can flow through the coil. GM's eight-speed table checks the clutch 5 valve for an open-circuit flag over 0.3 s, and on the Allison 1000 the test on PCS 1 is rated Type A. The 2023 Corvette dual-clutch TCM looks at its system pressure pilot valve while switched off: a sense voltage between roughly 1.7 and 3.0 V means open load, confirmed after 150 ms (Type A). Ford's TR9070 maps open load of its line pressure pilot valve to the same code. A field case without wiring damage exists: GM's PIP5646 series for 2019-2020 Silverado and Sierra with the 8L90 names P2727 among the codes behind sudden rear-wheel lock-up and replaces the TCM.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 27

Possible causes

  • Broken wire or backed-out pin high
  • Open winding in solenoid E medium
  • Internal TCM fault (GM 8L90, PIP5646) medium
  • Connector not latched low

Symptoms

  • MIL on and limp-home gear
  • Rear wheels may lock at low speed (GM 8L90 case)
  • Harsh or missing shifts

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2727

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication