P2722
Pressure Control Solenoid E
P2722 is the base code for pressure control solenoid E and leaves the type of fault open. No manufacturer documents P2722 publicly. The pattern can be seen on the neighbouring valve: Toyota stores P2713 for solenoid D with a failure type byte appended, so a scan tool would show the same structure for E. GM and Ford instead publish dedicated codes for E, from P2723 (stuck off) and P2724 (stuck on) to P2727, P2729 and P2730 for the circuit. On GM's eight-speed valve E feeds clutch 5, on its nine-speed the C5 clutch, on the Allison 1000 the solenoid GM calls PCS 1, and on the 2023 Corvette and Ford TR9070 dual-clutch units the line pressure pilot valve. CARB covers such solenoids as comprehensive components.
Possible causes
- Solenoid E sticking or failing high
- Wiring or connector problem on the solenoid E circuit medium
- Contaminated or low transmission fluid medium
- TCM fault low
Symptoms
- MIL lit with possible further transmission codes
- Irregular shifting or fail-safe gear
- Engagement delay into drive or reverse
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2722
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.