P2721
Pressure Control Solenoid D Control Circuit High
P2721 is logged when the control line of solenoid D reads too high, typically because it touches battery positive. GM's 2016 six-speed tables describe it as circuit high covering an open or a short to power, set after 0.3 s in one trip, so on those units an open line can land here too. The 2023 Corvette dual-clutch TCM tests with the driver on and sets it when the sense voltage exceeds a limit that rises with supply, about 0.7 V below 11.5 V and 1.1 V above 15.5 V (Type A); Ford's TR9070 calls this shorted load. Subaru bulletin 16-149-25 lists P2721 on 2020-2023 Legacy, Outback and Crosstrek with the TR580 CVT: condensation reaches the control valve connector, and a new control valve and connector cover fix it.
Possible causes
- Moisture in the control valve connector (Subaru TR580) high
- Control wire shorted to a supply circuit medium
- Open circuit on units that report it as high (GM six-speed) medium
- Faulty solenoid D or TCM driver low
Symptoms
- MIL on and fail-safe operation
- Shift shock or missing gears
- Fault may follow wet weather or washing
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2721
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.