P2720
Pressure Control Solenoid D Control Circuit Low
P2720 reports a low signal on the control line of solenoid D, which in practice is a short to ground. GM's 2016 eight-speed table sets it on the clutch 4 valve after a 0.3 s ground-short flag within one trip; the six-speed tables do the same for their valve D. On the 2023 Corvette dual-clutch transmission the TCM checks the line while the low-side driver is on: if the sense voltage stays under about 1.7 V for at least 100 ms, the even-clutch shutdown valve is shorted to ground (Type A). Ford's TR9070 logs its shorted switch case under this code. GM's service update N182193520 names P2720 next to P2718 when the 8L45/8L90 valve body connector is not fully latched, so a poor connection can produce it as well as a pinched wire.
Possible causes
- Control wire pinched or chafed against ground high
- Valve body connector not fully seated medium
- Internally shorted solenoid D medium
- TCM driver fault low
Symptoms
- MIL on and limp-home operation
- Limited forward gears
- Harsh shifts
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2720
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.