OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P271E

Transmission Performance

P271E is a broad performance code for the transmission as a whole, used when the controller finds that the gearbox does not deliver what it should even though no single sensor or valve has failed. Honda applies it to the CVT of the 2016-2020 HR-V: service bulletin A21-046 adds P271E with new PCM software that detects early slip of the primary drive belt. When it sets, the D indicator flashes, the MIL comes on and engine output is cut to protect the belt from breaking. Companion bulletin A21-047 extends CVT warranty to 7 years or 150,000 miles because the belt is now OBD-monitored, and the inspection uses a magnet to look for metal shed by the belt. Other makers may use P271E with other meanings, so the maker's own diagnosis decides what was measured.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 1E

Possible causes

  • Slipping or deteriorating CVT drive belt (Honda HR-V) high
  • Insufficient clamping or line pressure in the transmission medium
  • Control software without the latest calibration low

Symptoms

  • Flashing D indicator and MIL on
  • Reduced engine power
  • Engine flare or weak acceleration

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P271E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication