P271C
Park Pawl Position Sensor B Circuit Low
P271C covers the second park pawl position sensor, B, whose signal has fallen below the valid range. Park-by-wire designs often fit two position signals so that a single faulty reading cannot release or engage the pawl by itself; sensor B is the backup or comparison channel to sensor A. A low reading points to a short to ground, a missing reference voltage or a sensor that has failed low. No manufacturer documents P271C publicly; the only published field case in this family is Ford's recall 26V688, which concerns sensor A in the park module of the HF55 hybrid gearbox. With one channel lost the controller usually still knows the pawl state from the other, but it will warn the driver and may limit shifting into or out of Park.
Possible causes
- Sensor B signal wire shorted to ground high
- Reference voltage to sensor B missing or low medium
- Corrosion inside the park actuator module medium
- Failed position sensor B low
Symptoms
- Shift system warning, vehicle usually still drivable
- Delayed or refused Park engagement
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P271C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.