OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2719

Pressure Control Solenoid D Control Circuit Range/Performance

P2719 means the electrical readings on the control circuit of solenoid D are implausible, although neither a clear open nor a clear short is present. In GM's 2016 table 16OBDG03 the T76 six-speed flags it when the hardware layer reports an invalid voltage in at least 4.4 of 5 seconds; valve D is the 2-6 brake there, and the code is listed without MIL. Bulletin PI0893 matches this for the 2013 6T70/6T75 in Enclave, SRX, XTS, Equinox, Malibu, Traverse, Acadia and Terrain: P2719, P2728 and P0965 are Type C codes that may be stored falsely at fluid temperatures from -0.5 to 0 °C in Park or Neutral, cause no drivability issue and need no parts. Only if the code stays active above 0 °C is normal circuit diagnosis due.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 19

Possible causes

  • False history code near freezing fluid temperature in Park/Neutral (GM 6T70/6T75) high
  • High resistance at a terminal or splice medium
  • Solenoid coil with drifting resistance low
  • Internal TCM measurement fault low

Symptoms

  • Stored history code without noticeable symptoms
  • No MIL on GM vehicles (Type C)
  • Occasional shift quality changes if the fault is real

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2719

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication