P2718
Pressure Control Solenoid D Control Circuit/Open
P2718 points to an open control circuit of solenoid D: the coil draws no current because a wire, pin or the winding itself is broken. GM's 2016 eight-speed table runs the open check on the clutch 4 valve and fails it after 0.3 s within a 0.5 s window (one trip); the 2017 and 2018 nine-speed tables use an impedance measurement. In 2018 GM issued service update N182193520 for 8L45 and 8L90 units in Camaro, Colorado, Corvette, Silverado and others because the valve body connector might not be fully seated, setting P2718 or P2720 and forcing limp-home. For the even-clutch shutdown valve of the 2023 Corvette dual-clutch box, it stands for open load, seen while switched off (Type A); Ford's TR9070 also files open load here.
Possible causes
- Valve body solenoid connector not fully seated (GM 8L45/8L90) high
- Broken wire or pushed-out pin in the harness medium
- Open winding in solenoid D medium
- TCM output stage fault low
Symptoms
- Limp-home mode with limited forward gears
- MIL on immediately
- Harsh engagements
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2718
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.