OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2714

Pressure Control Solenoid D Performance/Stuck Off

P2714 says the clutch served by solenoid D does not apply as commanded, so the gearbox slips in a gear that needs it. In GM's 2016 table 16OBDG03 valve D is clutch 4 (C2-3-4-6-8) on the eight-speed and the 2-6 brake on the T76 six-speed; slip of 400 rpm or more for 3 s, counted over three events, sets it after one trip. GM bulletins call it solenoid valve 4 stuck off: on the 10L80 a loose retainer ring lets the input internal gear separate (PIP6008), on the gasoline 10L1000 the C4 piston seal degrades (24-NA-148), on the VT40 CVT a sticking clutch regulator valve is blamed (PIP5819). On the 2023 Corvette dual-clutch box it means the even-clutch redundant shutdown valve, Type A, as does Ford's TR9070. Loss of a gear or reverse is typical.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 14

Possible causes

  • Leaking clutch piston seal or damaged clutch housing (GM 10L1000 C4) high
  • Regulator or line pressure valve stuck by debris or sediment medium
  • Internal mechanical failure such as a dislodged retainer ring (GM 10L80) medium
  • Low fluid level reducing apply pressure low

Symptoms

  • Slipping or flare in gears that use the affected clutch
  • No reverse or no forward drive in some cases
  • MIL lit and transmission in a substitute mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2714

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication