OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2713

Pressure Control Solenoid D

P2713 is the umbrella code for pressure control solenoid D; it names the valve but not the kind of fault, so the failure type byte behind it carries the detail. Toyota works this way. Bulletin T-SB-0076-24 lists P271371 (actuator stuck) among several valve codes on the 2024 Tacoma and fixes it by replacing gearbox and torque converter, while T-SB-0160-18 names P27137F for 2017-2018 Highlander and Sienna with the eight-speed transaxle, where whine, harsh shifts or reduced power lead to a remanufactured unit. GM and Ford instead use the separate codes P2714 to P2721. Which clutch valve D feeds differs by gearbox, so only the maker's data can say what is affected. Expect the MIL and rough or missing gears.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 13

Possible causes

  • Internal transmission damage that makes the valve or its clutch stick (Toyota replaces the unit) high
  • Pressure control solenoid D sticking from debris or wear medium
  • Wrong fluid level or degraded fluid medium
  • Wiring or connector fault on the valve circuit low

Symptoms

  • MIL lit with further transmission codes
  • Harsh, late or missing shifts
  • Whine noise or reduced power in some vehicles

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2713

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication