OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P270F

Transmission Friction Element F Temperature Too High

P270F closes the A-to-F series and signals that element F has exceeded its temperature limit. Only gearboxes with at least six shift elements carry a letter F, so the code belongs to modern multi-speed automatics, but no maker publishes its use or thresholds. It should be kept apart from P2787, which reports a hot clutch in general (for example a dual-clutch or launch clutch) without a letter, and from P0218, which concerns overall fluid over-temperature. P2705 is the apply-time test for the same element F. CARB lists transmission controls among the powertrain parts the OBD system must check. VW's 0AM dual-clutch material describes the typical reaction to overheating, a cut in engine torque. If the code repeats under ordinary driving, slip of F or a cooling fault should be checked.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 0F

Possible causes

  • Element F slipping due to low pressure or wear high
  • Severe duty such as towing, mountain driving or repeated launches medium
  • Low fluid or restricted cooler medium

Symptoms

  • Torque reduction and warning message
  • Gears using element F temporarily unavailable
  • Harsh or slipping shifts

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P270F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication