P270D
Transmission Friction Element D Temperature Too High
P270D is stored when the thermal state of shift element D rises above the controller's limit. The heat comes from friction during slip, so anything that lengthens slip on D counts: a sluggish apply, leaking seals in its hydraulic circuit, or hard use with a heavy load. Cooling also matters, because the fluid carries the heat away; a blocked cooler, a low level or oil that has lost its properties make the code more likely. Publicly, no manufacturer documents P270D or its thresholds, and the letter must be matched to a clutch with the specific gearbox data. CARB treats transmission controls as monitored powertrain components. For the driver the code mostly means a protective torque or gear limit; it does not by itself prove mechanical damage, but it should be investigated if it returns.
Possible causes
- Leaking seals in the apply circuit of element D lengthening slip high
- Blocked or undersized fluid cooler, especially when towing medium
- Old or wrong fluid with reduced friction and cooling properties medium
- Worn plates of element D low
Symptoms
- Limited torque or gear range for protection
- Transmission temperature warning
- Flare or slip on shifts involving element D
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P270D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.