OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P270B

Transmission Friction Element B Temperature Too High

P270B concerns the shift element lettered B. A multi-plate clutch has no sensor of its own, so the controller usually derives its heat from the energy turned into warmth while the plates slip and from the oil temperature, then compares the result with a limit. When B exceeds it, P270B is logged and the transmission software protects the element, typically by cutting engine torque or changing shift timing. No maker publishes P270B with thresholds, and the letter mapping differs from gearbox to gearbox. Volkswagen's 0AM dual-clutch training material shows the general idea: once the mechatronic unit reaches 139 °C, engine torque is reduced. P2701 covers element B taking too long to apply, which is a separate test, though a slow apply raises slip and can lead to P270B as well.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 0B

Possible causes

  • Slow or weak apply of element B creating extra slip (pressure or seal problem) high
  • Stop-and-go, steep grades or trailer loads medium
  • Wrong, low or degraded fluid medium
  • Implausible fluid temperature input distorting the calculated value low

Symptoms

  • Torque reduction or limited acceleration
  • Changed shift points or skipped gears
  • Shudder when element B engages

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P270B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication