OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2709

Shift Solenoid F Electrical

P2709 flags an electrical fault on shift solenoid F, found by the output driver rather than by watching the gearbox shift. Hyundai and Kia list it as the circuit code for that valve: Kia bulletin TRA 051 and Hyundai 15-AT-010 call solenoid F SS-B on their six-speed transaxles and replace parts instead of the gearbox, Kia first the solenoid, then the harness to the PCM, and only then the PCM if the code returns; Hyundai 12-AT-015-1 does the same for the 2012-2013 Genesis eight-speed. Ford is inconsistent: its 2024 summary text sends shorts on solenoid F to P0998/P0999, yet its tables give P2709 for a short to ground on 10R and 8F35/8F40 units and as the general electrical fault on 8F57/8F24, flagged after 1.5 s of driver feedback. Shifts using that clutch are lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 09

Possible causes

  • Defective coil in shift solenoid F (Hyundai/Kia replace the solenoid first) high
  • Chafed or corroded wiring or connector between PCM/TCM and transmission medium
  • Damaged internal transmission harness or lead frame medium
  • Faulty output driver in the PCM/TCM low

Symptoms

  • MIL lit and transmission in a fail-safe gear
  • Missing gears or sudden harsh shifts
  • Code returns immediately after clearing if the fault is permanent

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2709

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication