OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2705

Transmission Friction Element F Apply Time Range/Performance

P2705 covers the sixth friction element, F, so only transmissions with at least six shift elements use it, such as Ford's ten-speed and eight-speed families. The controller has found that F applies outside the time it has learned. Ford's SSM 50617 for Edge ST and Nautilus models from 2020 to 2022 with the 8F57 built up to 18 March 2022 reports cars returning to Park when drive or reverse is selected; the main code is P2707, and P2705 may accompany it. The cause is the F clutch piston, which serves second and eighth gear and whose rubber sealing surface can be damaged. On the 10R140, TSB 20-2375 includes P2705 among the codes from sticking main control valves and lets all six clutches be cycled. Roush's propane Ford chassis store P2705 without MIL.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 05

Possible causes

  • Damaged F clutch piston seal (Ford 8F57) high
  • Sticking valves in the main control valve body medium
  • Shift solenoid F not controlling pressure correctly medium
  • Low or degraded transmission fluid low

Symptoms

  • Harsh or slipping shifts in the gears using clutch F
  • Vehicle may fall back into Park when drive or reverse is selected (Ford 8F57)
  • Warning light on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2705

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication