OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2704

Transmission Friction Element E Apply Time Range/Performance

P2704 is stored when friction element E takes too long or too short a time to apply, judged against the speed change the controller expects for the shift. Ford bulletins tie the code directly to the E clutch. TSB 23-2376 describes F-550/F-600 trucks of model year 2022 with the 6.7L diesel and 10R140: once they have covered over 8,000 km the input shaft wears against the E clutch hub, its O-rings fail and the E clutch circuit loses pressure, so P2704 appears with P0771 and the wrench lamp; hub and O-rings are renewed. On the 2020 Transit with the 10R80, TSB 20-2185 links P2704 and P0772 to harsh engagement into drive from sticking valves. Land Rover's SSM71847 lists P2704-07 among ZF 9HP48 faults on 2014-15 Evoque and Discovery Sport.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 04

Possible causes

  • Pressure loss in the E clutch circuit from worn hub or damaged O-rings high
  • Sticking valves in the main control valve body medium
  • Transmission control software needing an update medium
  • Low fluid level from a leak low

Symptoms

  • Harsh engagement into drive or poor shift quality
  • Wrench, engine or gearbox warning on
  • Limp mode in a fixed gear on some gearboxes

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2704

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication