OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2703

Transmission Friction Element D Apply Time Range/Performance

P2703 points at friction element D: the time it needs to take up torque, as seen from turbine and output speed, no longer matches what the controller has learned. In Ford's eight-speed front-drive units the code turns up with reverse problems. TSB 21-2029 covers 2020 Escape models with the 1.5L EcoBoost and 8F24 built before 7 August 2020 that lose reverse while storing P0766 and P2703; fine particles keep the lever inside the electrically operated SOWC (selectable one-way clutch) from deploying, so that clutch and the filter are replaced. SSM 54825 reports P2703 with P0766 and P0767 plus harsh or missing reverse on 2023 to 2026 Escape 8F35 units and fixes it with a new selectable one-way clutch, rebuilt next to the A clutch, and an overhauled valve body. Ford's 10R140 bulletin lists it as well.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 03

Possible causes

  • Faulty or contaminated selectable one-way clutch (Ford 8F24/8F35) high
  • Sticking valve in the main control valve body medium
  • Worn clutch D plates or leaking seals medium
  • Debris in the transmission fluid low

Symptoms

  • No reverse or harsh engagement into reverse
  • Harsh or delayed shifts on gears using clutch D
  • Check engine light on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2703

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication