P2702
Transmission Friction Element C Apply Time Range/Performance
With P2702 the transmission controller reports that friction element C does not engage within the time it expects, measured from the shift command to the moment the speed ratio changes. Which clutch C stands for differs between gearbox designs. Ford names the code in several valve body bulletins. For 10R140 units in 2020 F-Super Duty trucks, TSB 20-2375 lists P2700 to P2705 among codes caused by sticking main control valves; below 8,000 km the dealer runs a break-in routine three times on the affected clutches, beyond that the valve body is replaced. SSM 54595 for 8F35 units in 2025 Maverick, Corsair, Escape and Bronco Sport built from September 2024 to September 2025 reports P2702 with P2706 and P2707 when the vehicle will not leave Park. Roush propane chassis store it without MIL.
Possible causes
- Sticking valves in the main control valve body high
- Worn clutch C plates or leaking piston seals medium
- Low or contaminated transmission fluid medium
- Outdated transmission software or lost adaptive values low
Symptoms
- Harsh or delayed shifts on gears using clutch C
- Vehicle may not shift out of Park on some Ford 8F35 units
- Wrench or engine warning light on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2702
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.