OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26FD

A/C Compressor Internal Control Module Performance

Electric A/C compressors in hybrids and electric vehicles carry their own inverter and control electronics. P26FD says this built-in module does not work as expected, as judged by the module that supervises the compressor. Audi documents the code for the 2016 A3 e-tron: the Climatronic unit J255 logs it instead of the engine module, and the MIL comes on purely as a network request. Bulletin 2047037/1 attributes it to a software error in the self-check of the refrigerant system and the compressor diagnosis; the cure is new Climatronic software, with the compressor replaced only if guided fault finding demands it. CARB requires monitoring of electronic A/C components whose failure affects emission control or other monitors. Cooling may still work or be limited.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / FD

Possible causes

  • Software error in the climate or compressor control high
  • Internal electronics or inverter of the compressor failing medium
  • Fault in the high-voltage supply or fuse of the compressor low

Symptoms

  • Check engine light on without a code in the engine module
  • Air conditioning weak or not cooling
  • Further A/C codes stored as sporadic

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P26FD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication