OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26FA

Coolant Pump C Overspeed/Air in System

P26FA flags a coolant pump C that turns far faster than it should – the classic sign of a pump moving air instead of liquid. GM uses the code in the engine module of its diesel calibrations for the pump of the low-temperature coolant loop: in table 20OBDG04 an actual speed of at least 4,500 rpm in 5 of 8 one-second samples sets it, in 25OBDG04A 4 of 5 samples suffice. Both list it as Type B, so the MIL comes on after two trips; the test needs at least 11 V at the powertrain relay and is skipped while the engine cranks. GM bulletin 21-NA-149 names P26FA among many codes caused by a chafed engine harness on Silverado and Escalade models. The first check is coolant level and bleeding; the sister codes P2BA0 (underspeed) and P26F8 (stuck) cover the opposite cases.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / FA

Possible causes

  • Low coolant level or air left in the low-temperature loop after service high
  • Leak in the loop drawing in air medium
  • Chafed engine harness corrupting pump signals low
  • Impeller slipping on its shaft or broken low

Symptoms

  • Check engine light on after two trips
  • Gurgling from the pump area
  • Higher charge air temperature and possibly reduced power

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P26FA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication