OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26F9

Coolant Pump C Control Module Overtemperature

Electric coolant pumps carry their own control electronics, which are cooled by the liquid passing through the pump. P26F9 means the electronics of pump C have reported a temperature above their limit. That rarely points to a defect in the module itself; far more often coolant is missing around it, air is trapped in the pump, the impeller is partly blocked and draws high current, or the pump sits in a very hot spot. No manufacturer documents P26F9 in public. Ford's OBD summaries show how such a check works on the engine coolant pump code P26D2: the pump reports its temperature over LIN and the PCM stores the code once 130 °C is exceeded for five seconds. CARB requires electronic components that serve emission control to be monitored. The electronics usually derate or stop the pump to protect themselves.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / F9

Possible causes

  • Low coolant level or air trapped in pump C high
  • Partly blocked impeller causing high current medium
  • Faulty temperature sensing in the pump electronics low

Symptoms

  • Check engine light on
  • Pump C runs at reduced speed or switches off temporarily
  • Heating or cooling of the affected loop varies

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26F9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication