OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26F5

Coolant Pump C Control Circuit Low

P26F5 reports that the control circuit of coolant pump C is pulled too low. Bentley documents the code in the engine electronics of the Continental GT/GTC and Flying Spur. Bulletin 2058340/1 (Continental 2018–2019, cars without parking heater) blames internal corrosion of the additional coolant pump that shorts it out; cars built before 15 July 2019 get a pump from another supplier together with a new bracket. Bulletins 2078799/1 to /3 (2024 V8 models) describe the code as intermittent and caused by over-sensitive self-diagnosis of the heater auxiliary pump; after checking the wiring for corrosion and coolant ingress the pump is replaced, and Bentley states that heating and engine are not affected. In both cases the MIL is lit, so the code is emission-related despite the harmless symptom.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / F5

Possible causes

  • Internal corrosion of the pump causing a short circuit high
  • Over-sensitive internal diagnosis of the pump (known pump part number) medium
  • Control wire shorted to ground or coolant in the connector medium

Symptoms

  • Check engine light on
  • Often no noticeable change in heating or engine behaviour
  • Fault may come and go (stored as intermittent)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26F5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication