P26F4
Coolant Pump C Control Circuit/Open
Coolant pump C is a third electric pump next to pumps A and B; which circuit it serves is defined by each manufacturer. In Bentley's V8 models from the Volkswagen group it is the auxiliary pump for the heater circuit, while GM's diesel tables use the C codes for the pump of the low-temperature loop. P26F4 means the control line to this pump is open, so the module cannot command it or receives no feedback. No manufacturer documents P26F4 itself in public; the closest case is Bentley's bulletin 2058340/1 on the low-side code P26F5, where an internally corroded pump led to a lit MIL. CARB requires circuit checks on electric components that affect emissions or other monitors. Depending on the loop, heater output drops or charge air and electronics are cooled less.
Possible causes
- Broken control wire or loose connector at pump C high
- Corroded pins from road splash or coolant ingress medium
- Internal electronics of the pump failed medium
Symptoms
- Check engine light on
- Weak cabin heating at idle or with the engine stopped
- Higher charge air or component temperatures, depending on the loop
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P26F4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.