P26ED
Engine Sound Control B Circuit Low
P26ED concerns the second sound actuator and indicates a drive line pulled toward ground. A conductor rubbed bare on the exhaust bracket, a pinched loom or corrosion bridging the pins of a wet plug are the classic culprits, along with a shorted coil inside the actuator. No maker publishes this code or its limits; the A counterpart P26DC appears in Ford's 2014 code list, which is the closest reference. Where the second flap sits on the other exhaust branch, its wiring often takes a different route under the car than circuit A, so the A side being healthy says little about B. In everyday use the sound feature loses part of its effect, while engine power is not affected.
Possible causes
- Insulation of the actuator B wire worn through against metal high
- Corroded or wet connector at actuator B medium
- Short circuit inside actuator B medium
Symptoms
- Check engine light
- Second flap does not respond, sound only partly changes
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P26ED
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.