P26EC
Engine Sound Control B Circuit/Open
Where a vehicle has two sound actuators, for instance one flap per tailpipe side or a valve in addition to an intake sound tube, B designates the second one. P26EC is stored when its drive circuit is broken, so switching the output produces no current. No manufacturer documents P26EC or the rest of the B row in public; information exists only for circuit A, such as Nissan's GT-R muffler valve, and for related exhaust valve drivers that Ford checks for open circuits over 5 seconds. Which physical part is B therefore has to come from the wiring diagram of the specific car. CARB treats outputs like this as monitored components where emissions can be affected. Expect the second valve to stay inactive while the engine runs normally.
Possible causes
- Connector of the second actuator loose or disconnected high
- Wire to actuator B broken, for example by heat or vibration medium
- Open winding inside actuator B medium
Symptoms
- Check engine light, depending on the manufacturer
- Sound changes only on one side or not at all
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P26EC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.