P26DD
Engine Sound Control A Circuit High
With P26DD the module measures a voltage on the drive line of sound actuator A that is higher than the switching state allows. The usual reason is contact with a live conductor, for instance a neighbouring supply wire in a melted harness, or an internal fault in the actuator that feeds battery voltage back. The flap or valve may then stay energised regardless of the selected mode. Ford's 2014 code interpretation for its engine controllers carries P26DD with the lamp marking, without stating limits, and no other maker documents it. P26DB stands for an open circuit and P26DC for a grounded line, so here the search centres on harness sections where the drive wire runs alongside a supply line.
Possible causes
- Drive wire shorted to a supply wire, often where heat has damaged the harness high
- Internal fault in the actuator feeding voltage back into the drive line medium
- Incorrect or aftermarket actuator with different electrical layout low
- Output stage of the controlling module defective low
Symptoms
- Check engine light
- Valve stays in one position, sound permanently loud or quiet
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P26DD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.