P26C9
Chassis Control Module 2 Requested MIL Illumination
P26C9 is the message slot for a second chassis control module: if module 2 detects an emission-related fault, it can ask the engine module to switch on the check engine lamp, and the engine module records this request as P26C9. No manufacturer documents this code in public. The mechanism is known from its partner P26C8, which GM monitors in its 2018 engine and hybrid tables continuously from three seconds after power-up as Type A without its own lamp request. CARB's OBD rule requires that emission-relevant faults of other control units reach the driver through the MIL, which is why such forwarding codes exist. P26C9 says nothing about the actual defect – only reading the fault memory of chassis module 2 shows what lies behind it.
Possible causes
- Emission-related fault stored in chassis control module 2 high
- Incorrect configuration or software after module replacement low
- Low voltage or network fault corrupting the request message low
Symptoms
- Check engine lamp on
- Codes stored in a chassis module in addition to the engine module
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P26C9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.