OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26C7

Exhaust Flow Control Valve A Control Circuit High

P26C7 is the high-side counterpart: the control line of exhaust valve A carries more voltage than the driver expects, usually because the line touches battery positive or the actuator is damaged. In Ford's 2024 OBD summary it appears as failure type 12 of the valve A check, monitored all the time with a five-second window; the earlier summaries misprint it as P25C7 in their threshold list. Deutz's MD1 list uses it for an exhaust flap whose voltage is too high or shorted. Ford bulletin 25-2146 (Mustang 2018–2023 and Shelby GT500 2020–2022) groups P26C7 with the other flap codes, a lit warning lamp and a mode warning, and directs the technician to inspect the tailpipe actuator and its harness. Unlike P26C6, a high signal can also stem from a wire touching a powered circuit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / C7

Possible causes

  • Control wire shorted to battery voltage or another powered circuit high
  • Defective flap actuator electronics medium
  • Missing ground at the actuator pulling the line high low

Symptoms

  • Check engine lamp on
  • Exhaust mode warning in the instrument cluster
  • No change in exhaust sound between modes

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26C7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication