OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26C5

Exhaust Flow Control Valve A Control Circuit/Open

Exhaust flow control valve A is the electrically driven flap that switches the sound path or back pressure of the exhaust, mostly on sporty models with selectable exhaust modes. P26C5 means the output stage driving valve A finds the circuit open or otherwise unusable. In Ford's gasoline OBD summaries 2020–2024 a smart driver watches the output continuously and reports the fault after about five seconds; valve A belongs to bank 1 there, the second valve uses P2BF8 to P2BFA. Ford bulletins 21-2011 and 25-2146 (Mustang GT500, 2.3 L and 5.0 L) list it alongside a cluster notice that exhaust modes cannot be selected, traced to pinched wiring, a misaligned actuator bracket or a badly seated exhaust. Deutz names it for the exhaust flap of MD1 engines. The flap then stays where it last stopped.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / C5

Possible causes

  • Pinched, broken or unplugged actuator wiring near the exhaust high
  • Misaligned actuator bracket or poorly seated exhaust straining the harness medium
  • Open winding or internal fault in the valve actuator medium

Symptoms

  • Exhaust mode selection not available message
  • Exhaust sound no longer changes between modes
  • Check engine lamp on some vehicles

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26C5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication