OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26C3

Internal Control Module Transmission Range Sensor Performance

P26C3 comes from a second, independent checking layer inside the powertrain module: it recalculates the gear selector position (P-R-N-D) and logs a fault when it cannot confirm what the main signal path reports. Ford lists the code in its gasoline OBD summaries 2020–2024 as non-MIL; the 2024 edition splits it into sub-faults for range sensor A, range sensor B and the comparison of both. Ford special service message 47790 names P26C3 among the most frequent codes on 2013–2019 Fusion, MKZ and C-Max with the 2.0 L hybrid drive, caused by water or corrosion in several connectors. Faults in the sensor circuits themselves are covered by P0705, P2800 and P2805. Drivers usually notice a warning message or trouble selecting a gear.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / C3

Possible causes

  • Water ingress or corrosion in connectors of the range sensor or module wiring high
  • Worn or misadjusted range sensor or selector giving inconsistent positions medium
  • Control module software fault, cured by a calibration update low

Symptoms

  • Transmission or gear selector warning in the instrument cluster
  • Difficulty engaging a gear or leaving Park
  • Further codes such as P2800 or network faults stored at the same time

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26C3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication