P26C1
Engine Coolant Bypass Valve D Range/Performance
P26C1 means valve D works electrically but does not deliver the expected effect. Ford is the documented user, and on its plug-in hybrids valve D governs the cabin heating loop. Ford special service message 50325 and bulletin 22-2127 cover 2020–2022 Escape and 2021–2022 Corsair PHEVs that set P2183 for the second coolant temperature sensor, at times with an overheat warning; P26C1 can follow as a consequence. The root cause was a PCM soak timer that miscalculated how long the electric cabin heater had been off, so the fix is reprogramming several modules, starting with the PCM; checking coolant level and the ECT 2 connector came first. Ford's public summaries give no thresholds for P26C1. Diagnose P2183 before replacing the valve.
Possible causes
- PCM software miscalculating heater soak time (Ford PHEV) high
- Contaminated connector of coolant temperature sensor 2 medium
- Valve D moving slowly or sticking medium
- Low coolant level low
Symptoms
- Check engine light
- Engine overheat message in the cluster
- P2183 stored at the same time
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P26C1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.