P26BC
Engine Coolant Bypass Valve C Stuck Closed
P26BC covers a valve C that will not open on command even though its drive circuit is intact. Public criteria for this code are not available from any manufacturer. GM folds a valve C that fails to reach its target into the range/performance code P26BB, and Ford checks its radiator bypass valve C only for circuit faults. GM's stuck-closed logic for the block valve under P26C2 shows one way to detect it: a position error of at least 10° (5° in 2025) while the feedback stays below 50°. CARB asks for functional monitoring of outputs where feasible and for cooling system checks. This is the riskier direction: if valve C blocks flow to the radiator, heat cannot be shed, so watch the temperature gauge and stop before the engine overheats.
Possible causes
- Valve C seized in the closed position high
- Actuator too weak to overcome friction or deposits medium
- Low coolant level or trapped air distorting the temperature check low
Symptoms
- Check engine light
- Rising engine temperature, possible overheat warning
- Reduced engine power to protect the engine
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P26BC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.