P26BA
Engine Coolant Bypass Valve C Stuck/Open
P26BA is meant for a valve C that stays open although the controller wants it shut, while its circuit tests fine. No manufacturer documents this code in public sources. GM and Ford, which both use the letter C, cover their valve C functionally through other codes: GM's L3B and diesel tables treat a valve that misses its target angle as P26BB, and Ford watches its radiator bypass only electrically. How an open-stuck check can be built is shown by GM's block valve logic for P26C0, which needs a position error of at least 10° while the feedback still reports the open side. CARB requires a functional test of output components where feasible. If the valve hangs open, coolant flows when it should not, so warm-up is slow and the engine may stay below its target temperature.
Possible causes
- Valve C jammed in the open position by wear or deposits high
- Dirty or mixed coolant hindering valve movement medium
- Incorrectly learned end positions after a repair low
Symptoms
- Check engine light
- Slow warm-up and lower temperature gauge reading
- Weak cabin heating in cold weather
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P26BA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.