P26B9
Engine Coolant Bypass Valve C Control Circuit High
P26B9 reports supply voltage where the valve C driver should see none, in practice a short to battery positive. Two makers document it. Ford's 2024–2025 gasoline summary pairs it with the open-circuit code as P26B9/P26B7_12: the smart driver for the radiator bypass valve flags the fault and the PCM stores it after 5 s of continuous monitoring. The 2020–2023 edition did not yet list a high code. GM's 2025 diesel table 25OBDG04B watches both motor directions of the H-bridge for a line shorted to positive, Type B, and GM bulletin 21-NA-149 names P26B9 among the codes a chafed engine harness can cause. A shorted line may force the motor against an end stop or make the driver shut down, so cooling control is degraded until the wire is repaired.
Possible causes
- Drive wire shorted to a battery-voltage circuit high
- Engine harness damaged by chafing or heat medium
- Internal fault in the valve C actuator low
Symptoms
- Check engine light
- Temperature gauge higher or more erratic than usual
- Valve does not respond to scan tool commands
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P26B9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.