OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26AF

Engine Coolant Bypass Valve B Stuck/Open

P26AF is the functional fault for valve B remaining open against its command. No manufacturer documents this code publicly; Ford, for instance, monitors its valve B (transmission cooling) only electrically through P26AC/P26AE. How an open-stuck check can work is shown by Ford's hybrid logic for P26AB on valve A, which compares two coolant temperatures for 60 s after the valve should have changed state. CARB requires output components to be checked for proper functional response where feasible. A valve stuck open on an auxiliary coolant path wastes heat during warm-up, so the engine or transmission takes longer to reach temperature; causes include deposits, a broken return spring or gear, or a seized actuator.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / AF

Possible causes

  • Valve held open by deposits or debris high
  • Seized actuator or broken drive gear medium
  • Coolant temperature sensor bias misleading the check low

Symptoms

  • Check engine light
  • Longer warm-up, higher fuel use on short trips
  • Lower cabin heat in cold weather

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26AF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication