OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26AE

Engine Coolant Bypass Valve B Control Circuit High

With P26AE the valve B drive output sees voltage where it expects none, typically a short to battery. GM's 2016 Volt table again applies it to the second drive line of the one bypass valve: the VICM sets it when driver 2 flags a short to high while the valve is stopped or commanded low, after 16 failures in 20 samples at 100 ms, Type B. Ford's 2024–2025 gasoline summary lists P26AE as the short-to-battery case of the active transmission cooling valve, also filed as P26AC_12, detected when the smart driver reports a fault for 5 s. A pinched harness touching a supply wire or an internally shorted valve motor are the main causes; drivers often protect themselves by switching off, so the valve stops moving.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / AE

Possible causes

  • Drive wire shorted to a battery-voltage wire high
  • Internally shorted valve motor or solenoid drawing excess current medium
  • Damaged output stage in the control module low

Symptoms

  • Check engine light
  • Valve stays in its last position
  • Transmission or cabin temperature control off target

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26AE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication