OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26AD

Engine Coolant Bypass Valve B Control Circuit Low

P26AD indicates a drive line of valve B pulled to ground. GM uses the code differently from the title: on the second-generation Volt (2016 table, VICM) the single coolant bypass valve has an H-bridge motor with two drive lines, and P26AD stands for driver 2 reporting a short to low while the valve is commanded toward the high position. Four failures in five samples at 100 ms set it as Type B; it is one of the codes that blocks P26A5, P26A9 and P15C5. Ford's 2014 gasoline list and its 2020–2025 summaries do not use P26AD. CARB requires output circuit faults to be detected but does not demand separate codes for each fault type. Expect a chafed wire to ground or a shorted motor winding.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / AD

Possible causes

  • Drive wire chafed and shorted to ground high
  • Shorted valve motor winding medium
  • Coolant or water in the connector creating a leak path low

Symptoms

  • Check engine light after two drives (GM)
  • Valve no longer moves, heating or warm-up affected

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26AD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication