OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P26AC

Engine Coolant Bypass Valve B Control Circuit/Open

Which valve carries the letter B depends on the maker. Ford names it in its gasoline OBD summaries for 2020–2023 and 2024–2025: valve B is the active transmission cooling valve, which sends engine coolant to the automatic transmission oil cooler, while valve A heats the transmission. P26AC is set when the smart driver in the PCM reports a fault on that output for 5 s; in 2024 Ford also files it under the extended code P26AC_13 for an open circuit. CARB lets makers combine open, low and high faults of an output into one code, which is why P26AC is often the only electrical code used. With the valve unpowered, transmission oil may run hotter or colder than intended.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / AC

Possible causes

  • Broken wire or unplugged connector at valve B high
  • Open solenoid or motor winding in the valve medium
  • Faulty output driver in the PCM low

Symptoms

  • Check engine light
  • Transmission fluid temperature higher than normal when towing
  • Usually no change in normal driving

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P26AC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication