P269F
Exhaust Aftertreatment Glow Plug Circuit/Open
While P269B concerns the line that commands the exhaust glow plug, P269F targets the load circuit itself: the heating element or its power feed is open, so no current flows even when the control stage switches correctly. A burnt-out element is the usual reason, followed by a loose terminal at the plug in the hot exhaust area. There is no public manufacturer documentation for P269F. Ford's Transit with the 3.2 L engine, the documented user of this glow plug family, reports its vaporizer glow plug faults through the control codes P269B, P269D, P269E and P26A0 instead. CARB requires output components of an emission-related system to be checked for circuit faults. Without heat the injected fuel cannot vaporize, so the engine limits exhaust dosing and regeneration.
Possible causes
- Glow element burnt out high
- Loose or corroded terminal nut at the plug medium
- Blown fuse in the glow plug power circuit low
Symptoms
- MIL on
- Particulate filter regenerations fail
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P269F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.