P269C
Exhaust Aftertreatment Glow Plug Control Performance
P269C is the plausibility counterpart to the electrical control codes: the wires test fine, yet the control stage of the exhaust glow plug does not behave as commanded, for example a relay or driver that does not report the expected state or reacts too slowly. No manufacturer documents this code publicly. The closest documented case is Ford's 3.2 L Transit, where a vaporizer glow plug relay whose feedback disagrees with the command for about 60 s is a recorded fault, filed under P26A0 from 2017 and under P2689 before. CARB requires functional checks of such output components wherever feasible, beyond pure circuit continuity. An affected engine would lose or limit exhaust fuel vaporization, so regeneration suffers and the MIL can be expected.
Possible causes
- Glow plug relay switching late or not at all high
- Faulty feedback signal from the relay or driver medium
- Low system voltage during the control check low
Symptoms
- MIL on
- Particulate filter regeneration incomplete
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P269C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.