P269B
Exhaust Aftertreatment Glow Plug Control Circuit/Open
Some diesels inject fuel into the exhaust through a small vaporizer whose glow plug turns the fuel into vapor before it reaches the oxidation catalyst. Ford calls this downstream injection (DSI) on the 3.2 L Transit, used so that filter regeneration needs fewer in-cylinder post injections and less oil is diluted. P269B covers an open in the circuit by which the engine computer controls that glow plug. Ford's diesel summaries from 2017 and 2018 watch the line continuously with key on at 9 to 16.3 V battery voltage and set the open fault when the voltage stays between 2.9 and 3.2 V for 5 s. The 2015 and 2016 summaries reported the same condition as P2687. With the plug dead the fuel cannot be vaporized, so regeneration is cut back and the lamp comes on.
Possible causes
- Open wire or connector between engine computer and glow plug relay high
- Vaporizer glow plug relay coil open medium
- Blown fuse in the glow plug control feed low
Symptoms
- MIL on
- Particulate filter regenerations fail or become rare
- More frequent in-cylinder regeneration, oil level may rise
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P269B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.