P2694
Cylinder 9 Injector Data Incompatible
P2694 would flag bad or missing correction data for the injector in cylinder 9 and therefore only fits engines with nine or more cylinders, in road vehicles essentially V10s. No manufacturer documents this code publicly. GM's diesel tables end at P2693 for eight cylinders, and Ford's 2023 diesel summary covers the same eight codes; neither lists a cylinder 9 entry. The logic would follow theirs: a missing, out-of-range or checksum-failing code for that injector sets the fault, as CARB demands for coded injectors from 2015 on. If P2694 shows up on an engine with eight cylinders or fewer, suspect a scan tool decoding error or wrong software rather than an injector.
Possible causes
- Cylinder 9 injector code not programmed (ten-cylinder engines) medium
- Scan tool decoding error on engines without a ninth cylinder medium
- Controller software for a different engine low
Symptoms
- Check engine light on
- Usually no noticeable symptoms
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2694
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.