OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2693

Cylinder 8 Injector Data Incompatible

P2693 completes the series on V8 engines and covers the injector in cylinder 8. It is set when the controller finds no valid flow correction code for that position. In GM's 2018 table 18OBDG04 the code reads DID $67 and fails only once the manufacturer enable counter is zero; the 2025 table 25OBDG04A instead keeps the check permanently on in production units. Both rate it Type A. Ford's 2023 diesel summary covers it for the 6.7 L Power Stroke with a continuous check of about 0.5 s. When all eight codes appear together, a new or reset controller is far more likely than eight bad injectors; a lone P2693 points to work on that one injector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 93

Possible causes

  • Code of the new cylinder 8 injector not entered high
  • New or reset controller lacking all injector codes medium
  • Typing error in the cylinder 8 code low

Symptoms

  • Check engine light on
  • Possible rough idle or knock

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2693

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication