OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2691

Cylinder 6 Injector Data Incompatible

P2691 refers to the injector in cylinder 6. For six-cylinder diesels it is the last of the per-cylinder codes: GM's 2025 table 25OBDG04B stops at P2691, while the V8 table 25OBDG04A goes on to P2693. In both 2025 tables the check is always active on production controllers and fails if the end-of-line adjustment value was never written; as a further guard, a separate plausibility test under P060C looks at the size of the computed adjustment values. GM rates P2691 Type A. Ford's 2023 diesel summary lists it for its 3.0 L and 6.7 L engines. Programming the code printed on the cylinder 6 injector normally clears it; a recurring fault after correct entry points to the controller.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 91

Possible causes

  • Cylinder 6 injector code missing after replacement high
  • Entered value rejected as implausible by the software medium
  • Controller memory fault losing stored injector data low

Symptoms

  • Check engine light on
  • Possible knock or smoke from the affected cylinder

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2691

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication