P2690
Cylinder 5 Injector Data Incompatible
P2690 is the first code of the series that a four-cylinder engine cannot set; it needs at least five cylinders. It reports that the flow correction for the cylinder 5 injector is absent or rejected by the controller. GM uses it in its 2025 six-cylinder diesel table 25OBDG04B as well as in its V8 diesel tables, Type A, with the value stored under DID $64. Ford's 2023 diesel summary, which spans the 3.0 L V6 and 6.7 L V8, includes it too. On V engines the location of cylinder 5 varies: Ford counts one bank first, GM alternates sides, so the service data must be checked before touching an injector. Expect a lit MIL rather than drivability trouble.
Possible causes
- Cylinder 5 injector replaced without entering its code high
- Code entered for the wrong cylinder because of the bank numbering medium
- Injector code programming interrupted low
Symptoms
- Check engine light on
- Rarely uneven running
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2690
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.