OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P268F

Cylinder 4 Injector Data Incompatible

P268F flags missing or unusable correction data for the injector in cylinder 4. On four-cylinder diesels it closes the series: GM's 2014 table 14OBDG04 and 2016 table 16OBDG04 list P268C to P268F and nothing beyond. The 2014 version checks the IQA checksum before each trip and rates the fault Type B, so the lamp waits for a second failed trip; the 2016 version uses the DID $63 write check and Type A. Six- and eight-cylinder engines from GM and Ford use the code as well. CARB requires that a wrong compensation be detected and, where feasible, traced to the specific injector. A single unmatched injector seldom causes clear symptoms, but emissions and noise can rise.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 8F

Possible causes

  • New cylinder 4 injector fitted without code programming high
  • Code typed incorrectly into the scan tool medium
  • Used or replacement controller carrying another engine's codes low

Symptoms

  • Check engine light on
  • Possible rough idle or higher combustion noise

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P268F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication