OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P268D

Cylinder 2 Injector Data Incompatible

P268D concerns the stored flow correction for the injector in cylinder 2. In GM's 2016 four-cylinder diesel table (16OBDG04) the test runs with ignition on and passes once the end-of-line injector adjustment (EIA) value has been written via DID $61; a missing value only counts as a failure when the manufacturer enable counter is zero, i.e. on a finished production controller. The code is Type A there and in GM's 2020 V8 diesel table. Where cylinder 2 physically sits depends on the maker's numbering. Ford's 2023 diesel summary also uses P268D. CARB wants the stored code to point to the injector with the wrong compensation, hence one code per cylinder.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 8D

Possible causes

  • Adjustment value of the cylinder 2 injector not programmed after replacement high
  • Injectors moved between cylinders without updating codes medium
  • Programming session aborted (voltage drop, communication loss) low

Symptoms

  • Check engine light on
  • Slight misfire feel or noise from cylinder 2

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P268D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication