OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2681

Engine Coolant Bypass Valve A Control Circuit/Open

Bypass valve A is an electrically driven coolant valve whose role differs by maker. P2681 flags an open or otherwise faulty drive circuit. GM's 2011 Volt table checks it in the HPC2/VICM: 40 failures in 50 samples at 100 ms, Type B. Ford's 2020–2023 gasoline summary defines valve A as the automatic transmission cooler flow (transmission warm-up) valve and sets the code when its smart driver reports a fault for 5 s. Toyota bulletin T-SB-0112-24 (A25A and M20A engines, 2018–2021) replaces the water valve for P2681 subtypes 11 (circuit grounded) and 15 (open circuit or battery short). Ram 1500 3.6 L trucks needed a new three-way coolant valve with a cracked gear (07-005-24); VW reflashed 2024 Atlas engine controllers.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 81

Possible causes

  • Failed bypass valve (motor, gear or electronics) high
  • Chafed harness or open fuse in the valve supply medium
  • Loose or corroded valve connector medium
  • Engine control software causing false detection low

Symptoms

  • Check engine light on
  • Slow warm-up of engine or transmission
  • Maintenance or temperature warning message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2681

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication